Braces provide casing stability against wing and facilitate adjustments of casing elements.
Attention! Supporting and adjusting braces should be firmly attached to the girth profile and to the ground on which they are set.
Connection of the braces to the girth profile of casing elements..
Supporting brace 540
|
 |
||||||||||||||||||||||||||||||||
Supporting brace 340
|
 |
||||||||||||||||||||||||||||||||
Adjusting braces.Adjusting brace consists of:
(Quantity and types of intermediate posts are shown in Table 2) Main rule for choosing adjusting braces: Adjusting brace length should be 1,2 bigger then the distance from the place where casing elements installed to casing girth rail. |
 |
||||||||||||||||||||||||||||||||
| Length, L | Allowable axis load on pressure, kN |
Screw element with support articulate plate |
Intermediate parts |
Screw element without support articulate plate |
Screw head |
Hex bolts М16х60.8.8, nut М16.8, washer 16 |
Weight | |||
|---|---|---|---|---|---|---|---|---|---|---|
| min. L | half L | max. L | short 2,40 |
long 3,70 |
||||||
| 6,0-7,4 | 40,0 | 40,0 | 27,8 | 1 | - | 1 | 1 | 1 | 8 | 153,9 |
| 7,1-8,5 | 40,0 | 38,2 | 24,3 | 1 | 2 | - | 1 | 1 | 12 | 183,9 |
| 8,4-9,8 | 40,0 | 35,6 | 21,7 | 1 | 1 | 1 | 1 | 1 | 12 | 209,1 |
| 9,7-11,1 | 40,0 | 31,7 | 19,0 | 1 | - | 2 | 1 | 1 | 12 | 234,5 |
| 10,8-12,2 | 40,0 | 27,8 | 16,1 | 1 | 2 | 1 | 1 | 1 | 16 | 264,3 |
| 12,1-13,5 | 34,2 | 24,1 | 13,4 | 1 | 1 | 2 | 1 | 1 | 16 | 289,7 |
| 13,4-14,8 | 27,1 | 21,5 | 12,2 | 1 | - | 3 | 1 | 1 | 20 | 315,7 |
| 14,5-15,9 | 20,8 | 17,5 | 9,5 | 1 | 2 | 2 | 1 | 1 | 20 | 344,9 |
| Allowable axis load on tension – 40 kN |
Supplies with kit |
|||||||||
