- Anchoring should be always made on the bigger, by size, casing element.
- Anchors should be mounted to all holes on the frames (see pic. 10). On the
casing element junctions, anchors should be mounted only on one side; other holes
should be closed by corks.
- Anchoring with anchor shanks with special thread 15,0 mm.
- Anchoring with anchor shanks with special thread 20,0 mm.
- Tilts and height-wise displacement are possible with anchor shanks with special thread 15,0 mm for vertically installed elements. Due to bigger holes in cone hubs, frame elements can be tilted from one or from both sides as well as displaced by height.
- Anchoring system using anchor shanks for casing frame elements 3,30 m long is
shown on pic. 16 and pic. 17.
|
